The electric trolling motor is useful equipment for fishing. The primary purpose of this motor is to move the boat at a short distance to spot fishes. The electric trolling motor is now one of the most vital accessories for anglers. It is easy to install and use. With the latest GPS technology, you can automatically steer the course along the troll line and run silently. This type of motors is available in different shaft sizes. As such, it is perfect for both small and large boats.

Purpose of Using Electric Trolling Motor

  • The prime purpose is to move the boat
  • It comes with a backup motor, which helps if the gas motor fails
  • It is used for legalized trolling
  • You can move the boat a short distance virtually noiselessly
  •  Move slowly along the troll line
  •  Holds the position of the boat on top of a structure

Trolling Motor Power Source

Trolling motors come with 12-volt marine batteries for power click here to check detail about trolling power resources. The batteries are wired with a set of positive-negative wires. Wires are connected to the corresponding terminals on the marine battery. When connected, trolling motors get power from the batteries and run until the batteries are discharged. Note that trolling motors are much quieter than any other gas or fuel-burning motors. The total power of trolling motors is called thrust. Higher the thrust, faster it goes.

Using Trolling Motors for Fishing

Usually, trolling motors are mounted on the stern or bow of a boat of a different watercraft. It is either placed permanently or it may be mounted on brackets so that it can be taken on and off easily. Some motors come with handles, which users can manipulate with their hands and turn the motor in the right or left direction, or move back and forth. Other trolling motors come with special foot controls. While some devices are plugged into the motors, others may be wireless. Both varieties are useful for steering the motor using the feet. Apply pressure to the left of the foot control and make the trolling motor turn to the left, and vice versa

Using Troll Motor on Water

When trolling motor is under power, a typical prop located at the bottom of the motor starts spinning through the water. This is the mechanism trolling motors use proper boats and similar watercraft. Irrespective of the foot or handle control users decide how much power should be sent to the prop. The more the power, the faster spins the prop and the faster the boat moves. Some other factors influencing the speed of trolling motors include the number of blades, length of blades, weather conditions, water conditions etc.


Bow vs. Stern Mount – What to choose?

Bow mounts pull a boat through water and move faster. It uses lesser power than stern mounted motor pushing the hull. Bow mounts are remotely operated, which is an added advantage. On the downside, the initial outlay could be better.

On the other hand, stern mount electric trolling motors are used for very short distance. It is mounted on the transom of the boat and uses hand controls. It is relatively simpler and easier to use, just as the outboard motor.

Choose electric trolling motors as per your preference to enjoy hassle-free fishing.

There are currently no comments.